Here's a page copied from our Retail website www.aachristmas.com 

 

Please click here to view all the controllers we have for sale on this site.

 

This page is intended to show how a simple 3 track chasing controller can be used to create great chasing effects.

 

3 Track Universal Chaser Controller

3 Track Universal Chaser Controller
3 Track Model has 3 different chase mode settings.
2 Track Chase Mode
3 Track Chase Mode
3 Position Animation Mode
All 3 settings can be changed in the field
3 Track Model is able to carry loads up to 180 C7 bulbs per receptacle.


Chaser lighting controllers turn on one track at a time.
A 3 Track Universal Chaser has 3 receptacles.
Each receptacle represents one track.
 Track
All chaser controllers have a speed control dial.

 2 Position Santa Waving
2 Track Chase mode can be used for waving arms, a railroad crossing light, or any display that needs a flashing effect. The last receptacle is unused.



Fig 1    3 Track Chase Diagram 3 Track Chase Lights
 3 Track Chase Diagram
Fig 2    3 Track Chase Lights Example

Fig 1 Shows how 3 Track Chase Mode activates the three receptacles in order.
Fig 2 Shows a completed set of three track chase lights.
The three separate strands of lights are simply offset and wire tied together.

 Train with 3 Spoke Wheel Rotation
This Example shows three spoke wheel rotation.
One 3 Track Model is able to control all the wheels and smoke for this type of display.
One chaser controller can be used to animate an entire train.

 Three Snowflakes In Order
3 Track Chase is used to light three different shapes in order.

 3 Position Animation Bell
 3 Position Animation Bell
3 position animation is used for a swinging back and forth type motion.

3 Track Universal Chaser Controller Settings Instructions
3 Track Model
The photograph on the right is a font view of the circuit board located inside the controller. Note: All settings should be applied with the controller unplugged. Remove the two screws and the front panel. The jumpers are adjustable with needle nose pliers. The jumpers are pulled up and off the posts and pressed into place with pliers. Close Up Light Controller
Light Controller Receptacles Each receptacle in the photograph on the left represents one track. The chase pattern will turn on each track according to the settings.
2 Track Chase
Steps: 2
Pattern: 1, 2, repeat
Receptacle 3 is not used.
Settings Diagram
3 Track Chase
Steps: 3
Pattern: 1, 2, 3, repeat
Settings Diagram
3 Position Animation
Steps: 4
Pattern: 1, 2, 3, 2 repeat
Settings Diagram

Setting Instructions

IF YOU HAVE ANY MORE QUESTIONS PLEASE SEND THOSE TO 

INFO@AACHRISTMAS.COM

Back           Home